What is Network Installation?: Guidelines of Network Installation

Network Installation Services is an IT that provides cable system design, installation and project management services across the spectrum of data, voice, electronic security, audio and video technologies, including fiber optic-based power distribution systems. , copper and wireless. It is a systems company.

The network installation costs is done according to the specifications. For wireless networks, one or more devices are configured to allow Internet access throughout the area without using cables. When you create a physical network, the cables are laid in channels. This darkens the cable and protects it from damage. For room repairs, it is possible to hide the cable on the wall and attach the network socket, which makes the overview attractive. You can use cross panels with network nodes. This helps facilitate future network administration.

Guidelines of Network Installation

The most difficult part of installing a network cable is the physical task of running the cable through the ceiling, walls, and floor. This job is so difficult that you shouldn't try it yourself, except in a small office. For larger jobs, hire a professional cable installer. You can also hire a small job expert if you have difficulty accessing the ceiling or wall space.

If you choose to install the cable yourself, please refer to the following general precautions.

Twisted pair cables are available in pre-made lengths such as 50ft, 75ft, and 100ft. You can also order a precast cable of the required length. However, connecting the connector to the bulk cable is not too difficult. Precast cables should be used only in very small networks, where it is not necessary to route the cable through a wall or ceiling.

Always use more wire than necessary, especially if you run wires through walls. For example, if you run a wire on a wall, leave a few feet of slack in the ceiling on the wall. That way, you have enough cables in case you need to repair them later.

When wiring the cable, avoid sources of interference such as fluorescent lights, large motors, and X-ray equipment. The most common source of interference with cables running behind false ceiling panels is fluorescent lights. When laying cables, widen the lighting fixtures. You can do it in 3 feet.

you need to lay a cable on the floor where people walk, cover the cable to prevent the person from tripping. Cheap cable protectors are available at most hardware stores.

As you pass the cables through the wall, label each cable at both ends. Most electronics stores have cable tag pads that are perfect for the job. These pads include around 50 pre-cut labels with letters and numbers. They look much more professional than wrapping a loop of duct tape around the cable and writing on the tape with a marker.

Or, if you need shrimp, you can buy a permanent marker and burn it directly on the wire.

When multiple cables are attached, tie them together with a cable tie. If possible, do not use masking tape. The tape doesn't last, but the sticky adhesive does. It is a disaster a year later. Flanges are available at electronics stores.

When laying cables on suspended ceiling panels, use cable ties, hooks, or clamps to secure the cables to the metal frame that supports the actual ceiling or ceiling plate. You don't just put wires on the tiles.